Dry-Fix vs Mortar-Bedded Ridges: Which Is Better?
By Leonard Walton, owner & lead roofer3 min read
If your ridge tiles keep working loose or your verge mortar crumbles every few years, there's a better way — and it's now the standard way. A dry-fix (dry ridge) system holds ridge and verge tiles with mechanical clips and screws instead of mortar, so there's nothing to crack, wash out or blow off in a storm — and current tiling standards expect exactly that. Here's how the two compare.
The traditional way: mortar-bedded
For generations, ridge tiles along the top of the roof and verge tiles at the gable ends were bedded in mortar. It works — until it doesn't. Mortar is rigid, the roof moves and weathers, and over years the bedding cracks, washes out and lets go, loosening tiles and opening the roof to wind and rain. That's why repointing ridges and verges is such a common repair: mortar has a shelf life.
The modern way: dry-fix
A dry-fix system does the same job mechanically:
- Ridge and verge tiles clipped and screwed to a fixing, not glued down with mortar.
- A ventilated dry roll under the ridge, which also lets the roof breathe.
- Nothing to crack or crumble — no mortar in the equation at all.
The result is a roofline that's mechanically fixed, storm-resistant, ventilated, and needs far less maintenance over its life. On the re-roofs we do, this is how we finish the ridges, verges and vents as standard.
What the standard says
This isn't just fashion. Since the BS 5534 tiling and slating standard was updated, ridge and verge tiles on new work are expected to be mechanically fixed, not held by mortar alone. So a re-roof done properly, to standard, will use dry-fix (or fixed-and-bedded) methods. A roofer still bedding ridges in mortar only, on a new roof, isn't building to current best practice.
Which we recommend
For durability and peace of mind, we'd generally recommend dry-fix — it's what stops the recurring ridge and verge problems people are so used to. And you don't need a full re-roof to get it: a tired mortar ridge can be stripped and replaced with a dry-fix system on its own. That said, we'll always talk you through the options and quote clearly, so you choose with the full picture.
Frequently asked questions
What is a dry ridge system?
A dry-fix (dry ridge) system holds ridge and verge tiles with mechanical clips and screws and a ventilated dry roll, instead of bedding them in mortar. There's no mortar to crack, wash out or blow off, and the ridge is ventilated too.
Is dry ridge better than mortar?
For durability, generally yes — mortar cracks and lets go over time, while a mechanically fixed ridge stays put and needs far less maintenance. Current tiling standards expect ridge and verge tiles to be mechanically fixed, not just bedded.
Do I have to have dry ridge on a new roof?
Modern standards (BS 5534) require ridge and verge tiles to be mechanically fixed on new work, so a re-roof done to standard will use dry-fix or fixed-and-bedded methods rather than mortar alone.
Can dry ridge be added to an existing roof?
Yes — a tired mortar ridge can be stripped and replaced with a dry-fix system without re-roofing the whole thing, which is a popular way to stop recurring ridge and verge problems.
Ridge tiles loose or verge mortar crumbling again? We fit dry-fix rooflines — mechanically fixed, no mortar to fail — across Hull, Beverley, Hessle and the East Riding. Free fixed written quotes. Call 07447 352091.